Tai nghe bluetooth partron croise

     
Related DocumentsExternal PhotosExternal PhotosInternal PhotosInternal PhotosLabel InfoID Label/Location InfoUser ManualUsers Manual



Bạn đang xem: Tai nghe bluetooth partron croise

*

*

*
*



Xem thêm: Hướng Dẫn Tải Và Cài Đặt Pubg Thailan Thành Công 100, Pubg Project Thai

*
*

*
*



Xem thêm: Mua Bán Mèo Đen Tuyền Và Điểm Qua Những Nơi Bán Mèo Đen Tuyền

PBH-200 User Manual* Please refer lớn the manual at www.croise.teo.kr for more information CE Compliance InformationCroise.R, hereby declares that this PBH-200 is in compliance with the essential requirementsvà other relevant provisions of Directive 1999/5/EC.FCC Compliance InformationFCC ID : 2AD5K-PBH200This device complies with part 15 of FCC Rules. Operation is subject to lớn the following two conditions :(1) This device may not cause harmful interference, và (2) this device must accept any interference received,including interference that may cause undesired operation.Information to the user :NOTE : This equipment has been tested & found lớn comply with limits for a Class B digital device,pursuant lớn part 15 of the FCC Rules. These limits are designed khổng lồ pro°vide reasonable protection against harmfulinterference in a residential installation. This equipment generates, use & can radiate radio frequency energy và,if not in°stalled and used in accordance with the instructions, may cause harmful interference to radio communications.However there is no guarantee that interference will not occur in a particular installation,If this equipment does cause harmful interference to lớn radio or television reception,which can be determined by turning the equipment off & on.the user is encouraged khổng lồ try the correct interference by one or more of the following measures :- Reorient or relocate the receiving antenmãng cầu.- Increase the separation between the equipment và receiver.- Connect the equipment into an outlet on a circuit different from that to lớn which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.CAUTION TO USER : Changes or modifications not expressly approved by the các buổi tiệc nhỏ reasonable for compliance could voidthe user’s authority khổng lồ operate the equipment. Package ContentsPackage ContentsPBH-200 User ManualDescription of PartsInstallation of Cable ClipProduct Specifications & FeaturesHow to usenguồn on/offBattery ChargingPairingCallingTransferring a CallVolume ControlMusic PlayLanguage Set-up ChangeMulti-ConnectionUsing ApplicationButton Functions & Status InformationPrecautionsProduct Warranty & ServiceLimited WarrantyProduct Warranty Certificate14151617 / Package Contents /Cable ClipEarbud Covers(Large / Small)User ManualPBH-200※ The components of above package are subject lớn change without notice to lớn improvethe sản phẩm performance or chất lượng. / Description of Parts /Micro USBVolume UpMic 2Volume DownPlay / PauseCallMic 1LED / Installation of Cable đoạn phim /Please hang the clip on theheadset band by stretchingit little bit.Place it at the suit position andfix the earphone cable properly.※ The length of cable from the headset toàn thân lớn a user's ear can be easily adjusted through using the clip. / Product Specifications and features /Standby Time500 hoursOperating Time (Music)12 hoursOperating Time(Talk)14 hoursCharging Time2 hoursBatteryLithium Polymer Battery 3.7V (195mAh)Working Distance10mSupported profilesHFPhường / HSP.. / A2DPhường. / AVRCPDecoderSBC, APT-XCông nghệ Bluetooth VersionVersion 4.1nguồn Consumption0.5W※ Above operating time subject khổng lồ change based upon connected devices orthe surrounding environment. / How lớn use /1. Power nguồn On / OffPower On- Press the button for 1 second- The red + blue LED light flashes for 0.5 second và Power nguồn is turned on with voice guide.Power Off- Press the button for 3 seconds- The red + blue LED light flashes for 0.5 second and Power nguồn is turned off with voice guide.2. Battery ChargingLED indicator- When the charger is connected, the Red LED is on.- When charging is completed, the Blue LED is on.※ When the charger is connected, the headset will be disconnected from the device.※ The power turns off when USB charger is disconnected. Recommendations- Using USB Hub may take extra charging time due khổng lồ the low current.For Fast charging, please use the 5V 500mA ~ 5V 1A rated charger.※ It takes approximately 2 hours to lớn have it fully charged when battery exhausted3. Battery Status Alarm & Alert- Press Hotline & Volume + button at the same time for a second for audioguidance for the current battery cấp độ.“Battery Full” / “Battery Half” / “Battery not enough”4. Low Battery Alarm và Alert- The red LED light flashes 3 times with voice guidance “Battery not enough” if the batteryis less than 1 hour use.5. Critical Battery- The notice continues every 2 minutes if the battery is less than 10 minutes use andpower is turned off with voice guidance “Battery Empty” at the critical battery. 6. PairingBefore using the headset for the first time, you must pair it with a Bluetooth-enabled Device.* Pairing : Connect between Bluetooth-enabled Device và Headmix.- Press the Gọi button for 1 second to lớn turn on the device- After power on, the headmix will automatically enter lớn pairing mode.(The red/blue LED light flashes)- The headmix will automatically enter lớn waiting mode if it is not connected for 3 minutes.(The power is automatically after 50 minutes with waiting mode)- On the device you want to lớn have paired, find the Bluetooth thực đơn và tìm kiếm & select“PBH-200” from the menu of devices.- If connected without any problem, the headmix will be paired with audio guide “Connected”- Once pairing is complete, it will be paired automatically afterwards.※ Manual Pairing- Hold Hotline button for 2 second while placing power slide switch to ON then it will enter toPairing mode with voice guide “Start pairing”. And Register the PBH-200 in above sầu same way.- If PIN code is required, please input đầu vào “0000”. Clearing Paired Device- Hold Call button for 1 second and Volume button while placing power slideswitch to lớn ON then paired device will be cleared with voice guide “ Clear Paired List”and enter to lớn Pairing Mode.7. CallingVoice Dial- Briefly press gọi button khổng lồ activate Voice Dial.※ To use Voice Dialing, your Smartphone phone must support Voice Dialing.8. call Answer / Gọi End / Hotline Rejectđiện thoại tư vấn Answer / điện thoại tư vấn End- Briefly press Call button khổng lồ answer the incoming Call.- Briefly press Điện thoại tư vấn button lớn end the điện thoại tư vấn.Gọi Reject- Briefly press Gọi button lớn reject the incoming Gọi. 9. gọi Transfer- During the Call, press call button for 1 second, audio will be transferred from headphối tomobile phone.- And press gọi button for 1 second again, audio will be transferred from Mobile phoneto lớn headphối.10. Setting Waiting Mode while CallingSetting Waiting mode- During the Call, briefly press Điện thoại tư vấn button twice và enter to Hotline waiting mode.Pressing call button twice again bachồng to the Gọi mode.※ To use Hotline waiting mode, the di động phone must support ‘Gọi waiting’ service.Incoming second điện thoại tư vấn while calling- Briefly press Hotline button khổng lồ end the original call và answer the second hotline.- Briefly press gọi button twice to answer the second call without hanging up theoriginal Call (Original Điện thoại tư vấn will be Gọi waiting mode)Ending a Call- Briefly press gọi button. 11. Volume Control※ User can hear the long beep at maximum and minimum volume.Volume Up- While calling or listening the music, briefly press Volume + button.Volume Down- While calling or listening the music, briefly press Volume - button.Mute- During the call, press Volume +, - button at the same time for mute.- Press Volume +, - button at the same time again to cancel the mute.12. MusicMusic Play / Music Pause- To play a song or pause playbachồng, press Play/Pause button.Music Stop- Press Play / Pause button for 1second. Skip Backward- It goes bachồng to lớn previous music if press the Volume - button for 1 second during playSkip Forward- It goes lớn the next music if press the Volume + button for 1 second during playRewind- It rewinds if press the Volume - button for 3 second during playFast Forward- It forwards if press the Volume + button for 3 second during play13. Language set-up changeLanguage set-up will be changed if press the Volume + & Volume – together for 3 seconds.Sequence : Korean → English → Chinese 14. Advanced Multi-ConnectionMulti-connection is useful to lớn liên kết more than a Mobile device.Pairing- Proceed pairing of the first device manually.- nguồn off the headset upon registration of the first device is completed.- Power nguồn on holding the Call button for pairing mode.- Pairing 2nd device for registration.- Connecting 1st device to lớn the headset.Calling- Ring tone sounds when the second device has incoming điện thoại tư vấn while you are talkingthrough first device.- You can operate the same as "Setting Waiting Mode while Calling".Listening Music- In multi-pairing mode, key control is available for the first played device.- Press Play/Pause button briefly khổng lồ stop playbaông chồng from the first device.Then key control is available for 2nd Device. 15. Auto lớn ReconnectAutomatic connection when headmix is turned on- If it kept the information of previously paired device, it will be automatically connectedwhen headmix is turned on.※ If it failed automatic connection, briefly press gọi button once khổng lồ connect.Out Of Range- If a connected device is more than 10m away from the device,voice guides "Disconnected" with the vibration.- The notice continues every 30 seconds for three minutes & it automatically connectsif the device is placed in a connection range.16. Usage of Croise.R Reader applicationAdditional function is available such as change of headphối manner mode, Volume set-up,Message read set-up, Remote shoots, etc after set-up the Croise.R Reader app.Please tải về ứng dụng. in google play store by typing croise or partron.* It is available only for the app android (Device of higher than 4.3 version is available) 17. Button function và status informationFunctionActionPower ONPress the điện thoại tư vấn button for 1 secondnguồn OFFPress the điện thoại tư vấn button for 3 secondsVolume UpBriefly press the volume + buttonVolume DownBriefly press the volume - buttonStatusVoice : Turn onLED : Red & Blue LED blink at the same timefor 0.5 second and then off.※ 12 level of VolumeAnswer CallBriefly press the Gọi buttonReject CallPress the Gọi button for 1 second and take offCall CancelBriefly press the hotline button during the callMutePress the volume +, volume – shortly at the same timeTransferring a callPress the Hotline button for 1 secondGọi WaitingPress the hotline button quickly twice during the callVoice DialPress the button for 1 second & take offLED InformationReceiving a callDialing a callBlue LED lights flashes slowlyDuring the callBlue LED light flashes twice inevery 5 secStandbyRed LED light flashes once inevery 3 secDisconnectionBlue LED light flashes FunctionConnection toMobile PhoneActionStatusBriefly press the điện thoại tư vấn button onconnection standby statusRed, Blue LED lights flash in turnPairing relatedvoice information :Pairing ModePress the Điện thoại tư vấn button for 3 secondsin off modeConnectedConnectedDisconnectedDisconnectedLink LossOut of RangePairingStart paringConnectioninformation deleteBattery StatuscheckMusic Play / PauseMusic StopPress the Điện thoại tư vấn button & volume buttonat the same time for 1 second.Briefly Press Play/Pause buttonPress Play/Pause button for 1 secondduring the playBatteryStatusNoticeClear Paired ListDangerRed, Blue LED flash"Battery Empty."InsufficientRed LED flickers 3 times quickly"Battery not enough"Normal“Batter Half”Sufficient“Battery Full” FunctionActionSkip BackwardPress the volume – button for 1 secondand take off during playing the musicSkip ForwardPress the volume + button for 1 second& take off during playing the musicFast ForwardPress the volume + button for 3 seconds& take off during playing the musicRewindPress the volume - button for 3 secondsvà take off during playing the musicLanguageset-up changePress the volume + và volume –at the same time for 3 seconds.Sequence : Korean → English → ChineseVoice : Korean → English → ChineseDelete connectioninformationPress the điện thoại tư vấn button, volume –buttonfor 1 second at the same timein power off mode or standbyEnter pairing mode after deletingconnection information.Start ChargingConnect the cable for the rechargeCharging CompleteStatusRed LED is onBlue LED is onLED flashes when cable is removed (Power nguồn off) / Precautions /• Do not disassemble or modify. It may cause fire and disorder.• Do not use or place the hàng hóa at high or low temperature.• Do not place the product near the high humidity, volatile, or flammables.• Please be cautious not to lớn shochồng on the sản phẩm.• It might give sầu negative sầu effect on the ear hearing if used for a long time in high volume.• This bluetooth device might be damaged if either over 1A/1000mA of charger or thedefective charger is used.• In the case using oto charger, the high output from truông xã may affect khổng lồ the device.Also please have sầu the device disconnected from the cigar jaông xã charger which may affect tothe device when starting the oto engine. / Product Warranty và Service /• This device passed strict quality management & inspection process.• Warranty period is 1 year.• Even in the warranty period, you can be charged for the paid service if needed.• Product dimension & outer appearance might be changed for the chất lượng improvementwithout advance notice.• This device cannot be used for the human rescue related service as it have sầu the interference./ Guide for the Paid Service /• After Product Warranty Period (1 year/6 months for the battery)• User's negligence or any failure from improper disassemble, repair & modification.• Failure caused by acts of God such as fire và flood.• Failure using other options which is not provided from Partron.• This Warranty does not cover product failures due lớn improper repair installations,modifications or service performed by a non-authorized person.• Any Consumable parts. / Product Warranty /•The warranty is valid only if the original receipt issued khổng lồ the original purchaser by the dealer.•If the sản phẩm label is removed, physical change of the hàng hóa or unapproved repair by the3rd person, will invalidate of the warranty.•The consumables, such as ear cap, battery and other accessories, which have sầu limited life,will be excluded from the product warranty.•This Warranty vì not cover for the damage and accident by the misuse.•This Warranty vì chưng not cover the lost và damage of the hàng hóa on either transportationor delivery. / Product Warranty Card /Product NamePurchased DateMonthDayYearPurchased PlaceModel No.Warranty PeriodWithin 1 year from the purchased date(Battery Warranty period is 6 months) 1. Model Name : Neông xã Band công nghệ Bluetooth không dây Headset2. Part Number : PBH-2003. Manufacturer : PARTRON Co., Ltd.4. Country of Origin : Republic of Korea5. Address : 22, Samsung 1-ro 2-gil, Hwaseong, Gyeonggi 445-170, Korea- Please take the time to follow the instructions in this owner’s guide carefully.- Appearance & specifications of this product are subject lớn change without prior notice for productimprovement.* This device cannot be used for the human rescue related service because of the possibility of being interfered.

Chuyên mục: Tin Tức